Bike Parts & Upgrades
- Normalpreis £60.00 GBP
PX1 Flatpedale, CNC-Alu 9/16" - Purple
Normalpreis £60.00 GBPPX1 Flatpedale, CNC-Alu 9/16" - Gold
Normalpreis £60.00 GBPPX1 Flatpedale, CNC-Alu 9/16" - Chrome
Normalpreis £60.00 GBPPX1 Flatpedale, CNC-Alu 9/16" - Black
Normalpreis £60.00 GBPST1 35mm MTB-Vorbau, 31.8/35mm Klemmung - Oil Slick
Normalpreis £75.00 GBPST1 35mm MTB-Vorbau, 31.8/35mm Klemmung - Purple
Normalpreis £75.00 GBPST1 35mm MTB-Vorbau, 31.8/35mm Klemmung - Gold
Normalpreis £75.00 GBPST1 35mm MTB-Vorbau, 31.8/35mm Klemmung - Chrome
Normalpreis £75.00 GBPST1 35mm MTB-Vorbau, 31.8/35mm Klemmung - Black
Normalpreis £75.00 GBPW2 29" Laufradsatz, pegs-ready, 120 POE - Chrome
Normalpreis £175.00 GBPW2 29" Laufradsatz, pegs-ready, 120 POE - Gold
Normalpreis £175.00 GBPH1 BMX-Lenker, 4130 Chromoly, 30" breit
Angebotspreis £45.00 GBPNormalpreis£80.00F1 BMX-Gabel, 4130 Chromoly, 27mm Offset
Angebotspreis £95.00 GBPNormalpreis£165.00C100 Schaltauge
Normalpreis £15.00 GBPMonogram Pegs, 14mm CNC-Alu, inkl. Adapter-Kit
Normalpreis £25.00 GBPBMX Kettenblatt 25T, Alu, 19/22mm
Normalpreis £10.00 GBPRT1 BMX-Lenker, Sanko 4130, 9" x 29"
Angebotspreis £25.00 GBPNormalpreis£65.00RT1 BMX-Gabel, Sanko 4130, 28mm Offset
Angebotspreis £75.00 GBPNormalpreis£150.00BMX Pedale 9/16" für 3-teilige Kurbeln
Normalpreis £9.99 GBP20" SCHLAUCH
Normalpreis £4.00 GBPBMX 3-teiliges Kurbel-Upgrade-Kit, Mid BB + US Cups
Normalpreis £50.00 GBPHX1 C3 Steuersatz - Black
Normalpreis £45.00 GBPHX1 C3 Steuersatz - Chrome
Normalpreis £45.00 GBPHX1 C3 Steuersatz - Gold
Normalpreis £45.00 GBP'LH' SATTEL
Normalpreis £35.00 GBP'MONOGRAM' SATTEL
Normalpreis £32.00 GBPCOLLECTIVE x LOREM - Sattel
Normalpreis £40.00 GBPC100 PRO V3 RAHMEN - 24K
Normalpreis £295.00 GBPC100 PRO V3 RAHMEN - Ube
Normalpreis £295.00 GBPC100 PRO V3 RAHMEN - Kombu Green
Normalpreis £295.00 GBPC100 PRO V3 RAHMEN - Black/Chrome
Normalpreis £295.00 GBP'LH' SATTEL - BLAU
Angebotspreis £30.00 GBPNormalpreis£32.00W2 29" Laufradsatz, pegs-ready, 120 POE - Black
Normalpreis £175.00 GBPLH1 Schaltauge
Normalpreis £15.00 GBPC100 - SERIENPEDALE
Normalpreis £15.00 GBPC2 ACHSE
Normalpreis £22.00 GBPMTB Riser-Lenker 750mm x 31.8mm, 20mm Rise
Normalpreis £35.00 GBPBMX U-BREMSE HINTEN
Normalpreis £10.00 GBPIntegrierter BMX-Steuersatz 45x45 1 1/8"
Normalpreis £11.95 GBP20" BMX LAUFRADSATZ - SCHWARZ
Normalpreis £69.99 GBPRT1 SATTEL
Angebotspreis £10.00 GBPNormalpreis£30.00BMX REIFEN 20" x 2.3"
Normalpreis £9.99 GBPC1 BMX GRIFFE
Normalpreis £5.99 GBPBMX SATTEL/SATTELSTÜTZE COMBO
Normalpreis £14.99 GBPBMX LENKER - SCHWARZ
Normalpreis £20.00 GBPBMX LENKER - RAW
Normalpreis £20.00 GBP20" BMX LAUFRADSATZ GUM/BLACK
Angebotspreis £69.99 GBPNormalpreis£74.99
48 von 64
Mehr ladenGet back or get better
This is every part we sell, for wheelie bikes and BMX. Replace what’s worn, or upgrade your bike as you go. You don’t need to swap everything at once: start with what makes the biggest difference to your riding.
Wheelie bike parts
Upgrades for the C100, C3 and other 29-inch builds. The headline is the Hub 2: 120 points of engagement, so the drive picks up every 3 degrees, plus a peg-ready 10mm rear axle. Get it already built into the 29-inch W2 wheelset. Then dial in the cockpit with stems, grip with PX1 pedals, and finish with HX1 headsets and SC1 seat clamps. Derailleur hangers for the C100 and LH1 are here too. Everything is in Wheelie Bike Parts.
BMX parts
Spares straight off our C1 completes, upgrades, and Ryan Taylor’s RT1 range. Pegs, handlebars, forks, 20-inch wheelsets, tyres, tubes, grips, pedals, sprockets, a rear U-brake kit and a three-piece crank upgrade kit. Shop BMX Parts.
Seats and frames
Grippy, fat-padded bike seats, including the LH and Monogram. Building from scratch? The C100 Pro V3, X1 and our BMX frames are in Bike Frames.
Check the fit first
Check axle and spacing, clamp sizes and head tube standards against your frame before you order. Each listing has the full spec, and the compatibility table in Buying your first wheelie bike: the ultimate guide covers the C100, C3 and X1. If in doubt, ask us.
FAQ
What upgrade makes the biggest difference to a wheelie bike?
A high-engagement rear hub like Hub 2. The drive picks up almost instantly, which is what small corrections need. After that, grippy pedals and a cockpit that suits you.
Will these parts fit my C100 V3?
Many are designed for it. The C100 V3 uses a 31.8mm seat clamp and a 27.2mm seatpost. Check each listing’s spec before you buy.
Can I add pegs to my C100 V3?
Fit a W2 wheelset or Hub 2 rear hub first. The standard rear wheel is quick-release and doesn’t take pegs.
Do you ship parts internationally?
Yes. We deliver across the UK mainland (next working day or standard 3–5 working days), to the USA mainland (3–10 working days) and to the rest of the world (up to 10 working days). EU orders are delivered with all duties and taxes paid, so the price at checkout is the final price. Orders to other countries outside the UK may pick up import taxes or duties on arrival, paid by the buyer. Full details on Delivery and Returns.